Air Inlet Kit MPA0798

Air Inlet Kit MPA2216

Air Inlet Kit MPP9005 for PROS

Armature 230V for Miro 955/955-S

Armature No. 26 for PS 1524

Armature No. 50 for PS 1437

Assembly to Planetary Spindle 1/4-20 UNC2B MPA0456

Backing Pad 125mm 5/16" Grip Medium

125mm backing pad for grip discs. No holes and medium hard.

Backing Pad 32mm PSA Soft, 5/Pack

Female no hole PSA soft backing pad with an even surface.

Backing Pad 34mm Grip Medium, 10/Pack

34 mm medium hard backing pad with grip. Suitable for Mirka® AOS 130NV sander.

Backing Pad 70x198mm Grip 56H Medium

Grip backing pad for orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 75x100mm Grip 33H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 77mm 1/4" Grip 6H Medium

Backing pad for 77mm grip discs. 6H and medium hard. This backing pad is delivered with a pad saver including user instructions.

Backing Pad 77mm 1/4" Grip Medium

Backing pad for 77mm grip discs. No holes and medium hard.

Backing Pad 81x133mm Grip 54H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka® 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 125mm 5/16" Grip 28H Medium

A 125 mm backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently. This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Quick Lock pad 32mm Grip soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad with Quick Lock. Suitable for Mirka® ROS 150NV, AOS 130NV, AOS-B 130NV and AROS-B 150NV sanders.

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Quick Lock pad 32mm PSA soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing plate for DEOS 70x198mm

Backing plate for DEOS 81x133mm

Backing Plate Screw Kit

Bail Grip No. 41 for PS 1437

Bail Handle Kit No. 2 x 45,46 for PS 1524

Balancing Housing Screw Kit

Balancing Screw Kit for DEROS/PROS

A tool kit for reducing vibrations when sanding with pad saver or interface. Disconnect air supply/power cable. Remove the backing pad and add hex nuts and screws. Tighten to 2 Nm.

Balancing Weight for DEOS 70x198mm

Balancing Weight for DEOS 81x133mm

Ball Bearing 608 2RS No. 23 for Miro 955/955-S

Ball Bearing No. 18 for PS 1437

Ball Bearing No. 22 for PS 1437

Bayonet Swivel Connector No. 4 for Miro 955/955-S

Bearing and Vanes Kit AOS121

Bearing Housing for DEOS

Bearing Kit for DEOS

Bearing Kit MPA0802 for OS353, OS383

Bearing Kit MPA0807 for OS343

Bevel Gear No. 34 for PS 1524

Bevel Pinion AOS018 for AOS 130NV

Boot and Clamp Kit AOS141 for AOS 130NV

Brake Seal for LEROS

Brake Seal MPP0321 125/150mm for DEROS/PROS

Brush Holder No. 32 for PS 1437

Button Plate for LEROS, LEROS-S

Cable Clip Kit No. 8+9 for Miro 955/955-S

Cable Compl. No. 5 for PS 1437

Carbon Brush Holder No. 19 for Miro 955/955-S

for machines with serial no up to 4300000

Carbon Brush Holder No. 77 for Miro 955/955-S

for machines from serial no 4300001 ->

Carbon Brush Kit No. 18 for Miro 955/955-S, 2/Pack

for machines with serial no up to 4300000

Carbon Brush Kit No. 31 for PS 1437, 2/Pack

Carbon Brush Set for DE 915, 2/Pack

Carbon Brush+Cap Kit No. 76+78 for Miro 955/955-S

Carbon Brushes No. 15 for PS 1524, 2/Pack

Clamping Plate kit for DE 1025 L

Clamping Ring to Wheel Axle for DE 12xx, 9xx

Connecting Spindle No. 56 for Miro 955/955-S

Connector MPP0401 for PROS CV

Connector MPP0416 for PROS DB

Container Clamp for DE 1230/1242

Container Kit for DE 1025, 1125 L

Counter Weight Kit for AOS-B

Cover Cap Kit

Cover for Motor Cooling Filter for DE 1230/1242

Cover kit for AROS-B/AOS-B/ARG-B

Cover MPP0212 for PROS

Cover Plate for CEROS

Cover Plate for DEROS/DEOS

Cylinder Spring Pin+O-Ring Kit MPP9013 for PROS

Cylinder+O-Ring Kit MPA0994

Cylinder+O-Ring Kit MPA2593

DC Cable Female Plug for CEROS

DC Cable Kit 4m for CEROS

DC Cable Male Plug for CEROS

Drive Cable Kit No. 47+48 for Miro 955/955-S

Drive Shaft Compl No 55 + Pinion No 53 for PS 1437

Drive Shaft Compl No. 15 for PS 1437

Dust Guide No. 68 for Miro 955/955-S

Dust Hose Kit

Eductor Tube MPP0413 for PROS DB

Electronic Board 230-240V for DE 1025 L

Electronic Board 230-240V for DE 1230/1242 L AFC

Electronic Board for DE 915 230V

Electronics 230V No. 11 for PS 1524

Electronics No. 35 for PS 1437

Endplate Bearing Kit MPA0799

Endplate Bearing Kit MPP9002 for PROS

Exhaust Adapter MPC0108 for DB Machines

Exhaust Fitting Kit 28mm for CEROS

External Circlip R-32 No. 58 for Miro 955/955-S

Fairing Cover for LEROS, LEROS-S

Fairing for LEROS, LEROS-S

Fan 125mm for CEROS

Fan 150mm/2,5mm for CEROS

Fan 150mm/5,0mm for CEROS

Fan 2,5mm/130g Pad for DEROS 150mm

Fan 5,0mm/100g Pad for DEROS 125mm

Fan 5,0mm/130g Pad for DEROS 150mm

Fan 77mm/2,5mm for CEROS

Fan 8,0mm/130g Pad for DEROS 150mm

Fan Cover for LEROS, LEROS-S

Fan for DEOS

Fan for LEROS, LEROS-S

Fan Shroud No. 81 for Miro 955/955-S

Field & Temperature Sensor No. 2 for PS 1437

Filter for DE 415/915/1025/1125 L

Dust Extractor filter for Mirka DE 415/915/1025 L.

Filter Support Cage kit for DE 912/915/1025/1125 L

First Drive Shaft 706mm for Miro 955

Flat Washer No.18 for PS 1524

Front Endplate MPB0016

Gear Box Assembly for Miro 955/955-S

for machines with serial no up to 4300000

Gear Housing No. 10 for PS 1437

Gear Plate No.35 for PS 1524

Grip 75mm Yellow MPA0290

Grip AOS043 for AOS 130NV

Grip for CEROS

Ground Wire

Handle kit for DE 1230/1242

Handle Left for LEROS, LEROS-S

Handle Right for LEROS, LEROS-S

Handle Screw Kit

Hanger and Spacer Ring Kit MPA2832

Hatch Door Clamp kit for DE 1230/1242

Hatch Door Frame kit for DE 1230/1242 AFC

Hole Screw Kit for LEROS, LEROS-S 8/Pack

Hose 1,8m MPP9023 for PROS DB

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

Hose 27mm x 4m + Connector

A flexible dust suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust suction hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose 28mmx1,8m MPA0412

1,8m long dust suction hose and pneumatic cable. Suitable for 28 mm swivel exhaust for Mirka® pneumatic sanders.

Hose 4m for Miro 955/955-S

Dust extraction hose for Mirka® Miro 955 and 955-S. Antistatic (≤ 10¹¹ Ω/square)

Hose Adapter 32/54mm

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Hose Connector for LEROS, DEROS RS

Hose hook for DE 1230/1242

Hose Protection Device for Miro 955/955-S

Housing 77mm/125mm/150mm for CEROS

Housing and Mark Plate Kit MPP9012 for PROS

Housing for AROS-B, 5.0mm

Housing for DEOS 353/383

Housing for DEROS 550,625,650,680

Housing MPA0227 for 77mm/81x133mm Machines

Housing MPA0244 for ROS 125/150mm Machines

Housing Seal Kit MPA2531

Hub Cap for DE 912, 915

Interface 225mm 25H for Mirka LEROS, 1/Pack

5 mm thick soft interface for Mirka® LEROS backing pads. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 17mm Medium, 1/Pack

A medium hard,17 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Internal Circlip S-40 No. 64 for Miro 955/955-S

Joint Fork Kit

Joint Ring for LEROS, LEROS-S

Joint Screw Kit

Left Drive Cover No. 46 for Miro 955/955-S

Left Fork No. 51 for Miro 955/955-S

Left Handle Cover No. 75 for Miro 955/955-S

for machines from serial no 4300001 ->

Lever 2,5mm for DEROS

Lever 3,0mm for DEOS

Lever 5,0mm for DEROS

Lever 8,0mm for DEROS

Lever Kit 32/77/125/150mm/5,0mm for CEROS

Lever Kit 5,0/12000 MPP9008 for PROS

Lever Kit 77mm/150mm/2,5mm for CEROS

Lever Kit 8,0/12000 MPP9009 for PROS

Lever Kit for 2,5/12000 MPA0984 for ROS

Lever Kit for 5,0/12000 MPA0983 for ROS

Lock Ring+O-Ring Kit MPA0993

Lock Ring+O-Ring Kit MPP9011 for PROS

Locking Pin No. 8 for PS 1437

Mains Cable CE 230V IEC C13, CEROS, 2 m

Mains Cable UK 100-120V 1,5m for CEROS

Mirka Connector for Air+Electric Hoses

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Mirka Sleeve for Hose and Cable 3,8 m

A durable 3.8m long sleeve for cable and hose, that makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS standard hose (MIN6519411) and the 4.3 m cable.

Motor 125mm for CEROS

Motor 150mm/2,5mm for CEROS

Motor 150mm/5,0mm for CEROS

Motor 2,5mm/130g Pad for DEROS 150mm 230V

Motor 230V and Pushlock Washer 12mm for DEOS

Motor 3,0mm for AOS-B

Motor 5,0mm for AROS-B

Motor 5,0mm/100g Pad for DEROS 125mm 230V

Motor 5,0mm/130g Pad for DEROS 150mm 230V

Motor 77mm/2,5mm for CEROS

Motor 8,0mm/130g Pad for DEROS 150mm 230V

Motor Assembly 230V for DE 1025 L

Motor Assembly 230V for LEROS

Motor Assembly for DE 1230/1242 230V

Motor Cooling Filter for DE 912, 915

Motor Cooling Filter kit for DE 912, 915

Motor Housing kit for Miro 955/955-S

for machines from serial no 4300001 ->

Motor Housing MPB0356 for ROS2 125/150mm

Motor Housing MPB0356 for ROS2 125/150mm

Motor Housing No. 33 for PS 1437

Motor Switch No. 16 for Miro 955/955-S

Motor with Changeable Brushes 230 V for DE 915

Muffler and O-Ring Kit AOS109 for AOS 130NV

Muffler Connection+O-Ring Kit MPP9020 for PROS CV

Muffler Kit 12000 rpm MPP9004 for PROS CV, NV

Muffler Kit MPA0797 12000 rpm

Muffler Kit MPA0803 8000 rpm

Muffler Kit MPA0805 10000 rpm

Muffler Kit MPA2214

Muffler Kit MPA2348

Not in use! Spindle 1/4" 77mm MPB0083

Oiler AOS025

O-Ring and Valve Spring Kit AOS107

Pad Backing MPB0101 for OS 343

Pad Backing MPC0115 for OS 353

Pad screw 12x1,25mm

Pad Screw Kit for DEOS

Pad Support for OS 343/DEOS

Pad Wrench 17mm (curved) MPA0146 for 77mm

Suitable for 77 mm electric sanders and pneumatic sanders and polishers as well as for rectangular orbital sanders.

Pad Wrench 24mm for 125/150mm Machines

Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers.

PCB Screw Kit

PCB Spacer Kit for LEROS, LEROS-S

Pickup Magnet No.20 for PS 1524

Pivot Connecting Bracket No. 55 for Miro 955/955-S

Pivot Frame No. 54 for Miro 955/955-S

Plastic Washer No.19 for PS 1524

Pneumatic Box for DE 915 230V

Pneumatic box for Mirka Dust Extractor DE 915.

Potentiometer with Wire for DE 1230, 1242

Power and Signal Cable for LEROS 950

Power Cable kit 230V 4m for Miro 955/955-S

Power Cord (EU) for DE 1230, 1242

Power Cord (EU) for DE 915/1025/1125 L

Power Cord 2.0m for Battery Charger BCA 108 EU

Power for CEROS

Power Socket Assembly Kit

Pushlock Washer 10mm for DEOS

Rear End Plate AOS022 for AOS 130NV

Rear Endplate MPB0017

Retainer+O-Ring Kit MPA2551 for DB Machines

Retainer+O-Ring Kit MPA2697 for OS DB

Retainer+O-Ring Kit MPP9022 for PROS DB

Right Drive Cover No. 45 for Miro 955/955-S

Right Fork No. 50 for Miro 955/955-S

Right Handle Cover No. 74 for Miro 955/955-S

for machines from serial no 4300001 ->

Rotary Knob kit for DE 12xx, 9xx

Rotor AOS012 for AOS 130NV

Rotor, Vanes and Key kit MPA0801

Rotor, Vanes and Key kit MPA2220

Rotor, Vanes+Key Kit MPP9006 for PROS

Sanding Plate Base 225mm Grip 16H for MIRO

Sanding plate base 225 mm for MIRO 955/955S dry wall sanders.

Sanding Plate Cover No. 63 for Miro 955/955-S

Sanding Plate Cover for Mirka's Miro wall sanders.

Screw 5x18mm for DE 12xx, 1x25, 9xx

Screw Kit AOS147 for AOS 130NV

Screw Kit Fairing

Screw Kit for CEROS

Screw Kit for DEROS/DEOS

Screw Kit MPA1672 for OS Backing Pads

Screw Kit MPA2734 for 200mm Backing Pad

Screw Kit Y-Branch

Screw M4x20 No. 44 for Miro 955/955-S

Screw M4x25 No. 10 for Miro 955/955-S

Screw M4x8 No. 17 for Miro 955/955-S

Screw M5 No. 53 for Miro 955/955-S

Screw M5x10 No. 31 for Miro 955/955-S

Screw No. 9 for PS 1437

Screw+Washer M4x30 No. 33 for Miro 955/955-S

Seal for DEOS 353/383

Shaft Balancer Kit 2,5/150 MPA1670

Shaft Balancer Kit 2,5/150mm MPP9017 for PROS

Shaft Balancer Kit 5,0/150mm MPA0980

Shaft Balancer Kit 5,0/150mm MPP9018 for PROS

Shaft Balancer Kit MPA2154 for 2,5/77mm

Shaft Connecting Socket Kit No. 41+42+43 for Miro

Shroud 125mm for CEROS

Shroud 125mm MPC0012 for ROS machines

Shroud 150mm for CEROS

Shroud 150mm MPC0073

Shroud MPC0046 for 77mm NV

Socket 16A/250V (EU) for DE

Solenoid kit 220-240V for DE 1230/1242 AFC

Speed Control kit 230V for Miro 955/955-S

Speed Controller for CEROS (LV)

Speed Controller for DEROS/DEOS 230V

Speed Controller for LEROS

Speed Valve kit MPA0800

Speed Valve Kit MPA2218

Speed Valve Kit MPP9003 for PROS

Spindle Bearing Assembly AOS137 for AOS 130NV

Spindle Bearing Kit MPA0804 for ROS 32mm

Spindle Bearing Kit MPA2186 125/150mm

Spindle Bearing Kit MPA2226

Spindle Bearing Kit MPA2625 for ROS2 200mm

Spindle Bearing Single Seal kit for PROS

Spindle MPB0018 for 125mm+150mm

Spindle MPB0208 for ROS2/ROP2 125/150mm

Spindle MPP0320 for DEROS/PROS

Spring 2x49x40Lx4T No. 59 for Miro 955/955-S

Spring No. 7 for PS 1437

Start Button Kit for CEROS

Start Button Kit for DEROS/DEOS

Stator 230V Miro 955/955-S

Stator 230V No. 23 for PS 1524

Stator 230V Upgraded for Miro 955/955-S

Stator Screw M4x50 No. 22 for Miro 955/955-S

Strain Relief No. 4 for PS 1437

Switch for DE 1025, 1125 L

Switch No. 3 for PS 1437

Switch No.5 for PS 1524

Swivel 19mm Fitting Kit MPA1239 for OS CV

Swivel 28mm Fitting Kit MPA3207 for OS CV

Swivel Exhaust Kit for DEROS 125/150/175mm

Mirka® DEROS electric sander accessory.

Swivel Fitting 19mm CV MPA0987

Swivel Fitting 19mm Kit MPA0858 for DB Machines

Swivel Fitting 28mm MPP9007 for PROS CV, DB

Swivel Fitting Kit 28mm MPA0932 for DB Machines

Swivel Fitting Kit 28mm MPA0988 for ROS CV

Thumb Wheel No.12 for PS 1524

Torsion Spring 09x18x45 for DE 912/915/1025/1125 L

Turning Knob Kit for DE 1230/1242

Type Label Kit EU for AROS-B/AOS-B

Vacuum Adapter 36/29mm MPB0065 for ROS/CEROS

Vacuum Endcap Kit MPA2222 for ROS2 (CV & DB)

Vacuum Hose Kit No. 60+61+62 for Miro 955/955-S

Wire Leader No. 13 for Miro 955/955-S

Wire Leader No. 14 for Miro 955/955-S

Wire Leader No. 15 for Miro 955/955-S