Preventive Maintenance
How to take care of your Mirka tools
Our tools are made to be used and built to last – still, they need care to give their best. Preventive maintenance is crucial for durability.
General tips
Taking Care of Your Mirka Tool
- Clean the tool from dust, filler and paint
- Use Mirka backing pads that are designed for optimal performance
- Change the backing pad in time as a worn-out pad can increase the vibration level
- Protect your tool during transportation
How to care for
Pneumatic Sander
Proper maintenance is essential to keep your pneumatic sander performing at its best. In this guide, we will outline when and how to oil and clean your pneumatic sander to prevent premature wear and maintain optimal performance.
Lubrication
- Regular oiling of your pneumatic sander is crucial for smooth and trouble-free sanding.
- Ideally, use an FRL (filter, regulator, and lubricator) unit. If not available, follow these steps:
a. Add two drops of oil into the air inlet
b. Connect the air hose and run the sander at low RPM for 30 seconds to distribute the oil evenly
c. Use oil specifically designed for pneumatic tools, either provided with the machine or intended for this purpose - Ensure the proper functioning of the drain in your compressed air system
Cleaning
- Wipe the handle with a cloth to keep it clean and maintain a comfortable grip.
- Prevent dust and debris accumulation by regularly cleaning the air inlet connection, plug, and coupler.
- We recommend cleaning the tool on a regular basis to ensure optimal performance.
- Periodically check and clean the muffler as needed.
By following these lubrication and cleaning practices, you can maintain the efficiency and longevity of your pneumatic sander.
How to care for
Mirka® Dust Extractor
From utilizing the Push & Clean function to regular filter cleaning and dust bag replacement, following these maintenance practices will help you achieve outstanding results in your sanding projects while prolonging the lifespan of your equipment.
Maintenance
- Use Push & Clean function regularly (Push & Clean variants only)
- The effect can be strengthened by blocking the air flow from the hose or the opening in the dust extractor
- If you sand in extremely dusty environments, try using Mirka's cooling air filter for the 1230 dust extractor
- Airborne dust accelerates wear in the motor. By filtering cooling air, this can be avoided, prolonging the lifetime of the dust extractor
Filters
- The filter needs to be cleaned on a daily basis for optimal results
- Check and clean the dust filter without removing it
- If needed, remove the dust filter and continue cleaning it
- When needed, change the dust filter
Note: If there is a possibility of hazardous dust, it is important to replace the filter before resuming the use of the dust extractor.
Dust Bags
- Dust bags are required on all Push & Clean extractors
- Auto filter clean (AFC) versions can be used without bags but this requires that the AFC function is activated
- Changing the dust bag: We recommend that you change the dust bag regularly. We suggest you make it a daily, weekly or monthly routine, depending on application
How to care for
Electric Sanders
- Keep the air channels clean by blowing with compressed air
- Change of backing pad: Check its condition and if necessary, change the backing pad for optimal sanding performance
- Use/handling of electric cable: Handle with care, the cable should not be bent and twisted sharply
- Do not use the cable as a carry handle
How to Care For
Cordless Tools
- It is important to keep your cordless tool clean and remember to not use over-sized pads
- Battery: We recommend that you charge the battery regularly
- Spindle bearing: Check that the spindle bearing rotates easily (Mirka® AROS-B 150NV)
- Storage: To prolong the lifetime of the battery, avoid storing it in discharged condition
How to care for
Electric Polishers
- We recommend that you regularly clean the polisher and its ventilation slots. Need for cleaning depends on the material being worked on and duration of use
Please also remember that you should not press down the black and round locking button when the tool is on. Instead, press and hold down the switch. To lock into position, hold down the locking button and release the switch
Preserve the power
Unlocking Long-Term Performance with Care for Your Mirka Tools
Embrace the habit of caring for your Mirka tools, ensuring that they continue to serve you well for years to come.
Maintaining Performance, Protecting Your Tool and Embracing Sustainability
Sustainability is at the core of Mirka’s business.
We encourage our customers to take diligent care of their tools, as it plays a crucial role in prolonging the product's lifetime.
By extending the product's lifetime our customers can contribute to reducing waste and the need for frequent replacements. This helps conserve natural resources and minimizes the environmental footprint associated with tool production and disposal.
We see it as a win-win situation. Our customers can fully enjoy the benefits of their Mirka tools while limiting their environmental impact through proper care.
Do you want to know more?
Contact Us
Please get in touch and our expert support team will answer your questions.