Belt Sanding
Choose the right belt for your surface
Mirka Belt Range
Choosing the appropriate sanding belt can be a challenge. The abrasive must be optimized for the sanding application and surface, otherwise there is a risk of damaging both the surface and the belt sander.
Here you can learn more about what kind of belt we recommend for the surface and job in question. With the Belt Calculator, you can enter your specific measurements for a price estimate.
Learn more about belt recommendations for different surfaces and applications
Calculate the correct belt for your application
Mirka Sanding Belt Calculator
Choose the right belt to make more
Increase Profit
Overall sanding costs can be minimised simply by choosing the most suitable
product for each sanding operation. That means:
- Choosing the right type of grit and coating
- Using the optimal grit sequence
- Avoiding sanding with finer grits than necessary
Optimising belt lifespan with the right application
Sand Longer
The lifespan of the belt can be prolonged by ensuring that the sanding
equipment is correct and used properly.
- Choose the right type of sanding unit for each sanding operation
- Adjust the sanding machine correctly
- Ensure the machine is properly maintained
- Check that the dust extraction is adequate
Recommended grit size use
Grit Size and Sequence
In general, the first sanding belt is used for stock removal, while the following
belts are only used for creating an even surface finish.
Grit size | Use |
P24-P80 | Coarse sanding, calibration |
P100-P220 | Sanding before coating |
P220-P500 | Intermediate sanding |
P600-P1200 | Pre-polishing sanding |
High Technology Belt Sanding
Mirka Ultimax® Black
Built for durability and antistatic performance, the new Mirka Ultimax® Black redefines belt sanding. Its robust backing paper and specialized silicon carbide grain deliver outstanding results, maintaining high performance throughout the belt's lifespan.