Asia/Pacific

Europe

North America

South America

Global

How to repair a broken cable on Mirka DEROS/DEOS/LEROS?

Over time, the cables on Mirka DEROS, DEOS and LEROS tools might break due to wear and tear. To address this matter, Mirka shifted from molded cables to cables with rewireable connectors on these tools. This means the cable connectors can be changed by the user themselves, without need for special training. The rewireable connector also enables repair of hoses with integrated cables. The new rewireable connector fits all DEROS, DEOS and LEROS models regardless of different country versions. The connector is available both as a separate spare part and included in new cables.
Spare part connector (no cable) Part Number: MIE9011111US 

Related articles

Is the 1025 dust extractor self cleaning

The model 1025 is not self cleaning. The 1230 dust extractor has a self cleaning mechanism which cleans the filter automatically every 15 seconds. The self-cleaning action is noticeable from a "thump" sound.

Why does air blow out from the exhaust, but my sander isn't running

It is likely that air is bypassing the vanes in the motor. This can happen if one or several motor vanes are stuck in place. If the compressed air is contaminated with dirt or water, it can cause a sticky residue to form and this can cause the vanes to stick. While it is important to keep your tool

Why is water spraying out of my sander's exhaust

Water will build up in an air compressor during use. A "dryer", or an in-line water separation filter should be used to prevent moisture from reaching the tool components.

When and how to oil a pneumatic sander

If you experience the pneumatic sander gradually feeling slower, add 1-2 drops of oil into the air inlet and keep the machine running for 30 seconds so that excess oil is drained. The tool requires proper lubrication to prevent premature wear - keep it well oiled and it will continue to perform well

Why is my pneumatic sander running slower than normal

First of all, check and make sure there are no air leaks in the line, and that your compressor is producing 17 CFM at 90 PSI, the recommended pressure. If the air supply is adequate, check that the pneumatic tool is properly lubricated - it needs to be oiled to perform best. When the tool is noticed

Can Mirka LEROS be used for floor sanding

Mirka does not recommend using Mirka LEROS for hardwood floor or deck sanding, as it has not been designed for these particular applications.

Tools information & technical specifications

Product information and technical specifications for Mirka tools, including machine manuals, exploded views, spare parts, related products etc. are available on the Mirka website and can be accessed through the following links: Electric orbital sanders (DEOS) Electric random orbital sanders (DEROS,