Answer: First of all, check and make sure there are no air leaks in the line, and that your compressor is producing the recommended pressure: 17 CFM at 90 PSI.
If the air supply is adequate, check that the pneumatic tool is properly lubricated - it needs to be oiled to perform best.
When the tool is noticed to be running slower, add 1-2 drops of oil into the air inlet. Do not add too much oil.
Only lubricate pneumatic tools.
Related articles
Do Mirka sanders come with a pad wrench?
Answer: A wrench is supplied for changing the backing pad on a Mirka DEROS, Mirka PROS or Mirka ROS. You can find it located in the original packaging of the sander.
