Changing your backing pad regularly helps to keep your Mirka LEROS in tip top condition.
You will need: Hex socket 19mm and Phillips screwdriver.
- Remove the cover cap. Untighten the screw to remove the backing pad.
- Remove the screw.
- Remove the old pad.
- Attach the new backing pad to the spindle (aligned correctly) and tighten the pad screw with the hex socket.
- Attach the cover cap.
Related articles
Do Mirka sanders come with a pad wrench?
Answer: A wrench is supplied for changing the backing pad on a Mirka DEROS, Mirka PROS or Mirka ROS. You can find it located in the original packaging of the sander.
